Soundcore R50i Battery: Everything You Need to Know

ruminesia – The Soundcore R50i battery is an important aspect that you need to pay attention to to ensure an optimal music listening experience. With a good battery capacity, these earbuds offer impressive endurance, allowing you to enjoy music without worrying about running out of power.

However, like other electronic devices, this battery also has challenges that you may face. In this article, we will discuss the specifications of the Soundcore R50i battery, how to maintain it, and solutions to common problems that often arise.

Soundcore R50i Specifications

Specification	Detail
Type	True Wireless Stereo (TWS) Earbuds
Model	Soundcore R50i
Color	Black
Earbud Dimensions	25 mm x 20 mm x 21 mm
Charging Case Dimensions	70 mm x 36 mm x 32 mm
Weight (Earbud)	4.5 grams per earbud
Weight (Charging Case)	55 grams
Driver	10 mm
Frequency Response	20 Hz – 20 kHz
Impedance	16 Ohm
SPL (Sound Pressure Level)	92 dB
Bluetooth	5.2
Bluetooth Range	Up to 10 meters
Bluetooth Profile	HSP, HFP, A2DP, AVRCP
Usage Time	Up to 10 hours (without charging from case)
Total Time with Case	Up to 30 hours
Charging Time	1.5 hours (earbuds), 2.5 hours (case)
Charging Port	USB Type-C
Touch Sensor	Yes, for music and call control
Water Resistance	IPX5 (splash and sweat resistant)
Microphone	Two microphones for clear calls
App Support	Supports Soundcore app
Call Quality	Noise reduction during calls
Connection Stability	Bluetooth 5.2 provides stability and latency reduction
Design	Ergonomic and comfortable for long-term use

Specifications of the Soundcore R50i Battery

Here are some details regarding the specifications of the Soundcore R50i battery:

Capacity and Endurance of the Soundcore R50i Battery

Each Soundcore R50i earbud is equipped with a 40 mAh battery, while the charging case has a capacity of 400 mAh. With this capacity, you can enjoy a more extended music-listening experience without worrying about running out of power.

These earbuds can last up to 10 hours of continuous use after a single charge. With the charging case, the total usage of Soundscore r50i can reach 30 hours. Many users report that this battery life matches the claims, and in some cases, it can exceed 10 hours, depending on how you use it.

Charging Time and Usage of the Soundcore R50i Battery

To fully charge the earbuds, you only need about 2 hours. The charging case requires about 2.5 hours to fully charge. Remember that battery life can vary depending on several factors, such as the volume you use and the type of content being played.

Battery Indicator of the Soundcore R50i

The battery status indicator on the Soundcore R50i is beneficial for you in knowing the battery condition. Here’s the explanation:

• LED Light on the Case: This light shows the charging status of each earbud when placed in the case. The LED light can be green (full battery), yellow (charging), or red (low battery).
• LED Light on the Front of the Case: This light indicates the case’s charging status with the same colors as above. With this indicator, you can easily monitor the battery condition and ensure the device is always ready.

Charging Case Indicators Soundcore R50i

This is an explanation about charging case indicators Soundcore r50i:

• Blinking Green: This means the case is actively charging when connected to a USB power source.
• Solid Green: A solid green light indicates that the case is fully charged and ready to use.
• Solid White: This light shows that the case is charging the earbuds.
• Blinking White: If you see a blinking white light, the case’s battery is low but still has enough power to charge the earbuds.
• No Light: If there’s no light, the case’s battery is dead, and the earbuds cannot be charge

Tips for Maintaining the Soundcore R50i Battery

Properly maintaining the Soundcore R50i battery can extend its lifespan and keep its performance. Here are some tips you can follow:

• Charge When Needed: It’s best to charge when the battery is below 15%. Avoid letting it run entirely out, as this can shorten the battery’s lifespan.
• Ideal Charging Time: For the first charge, it is recommended that the charge be for at least 3 hours. For subsequent charges, 60 minutes is sufficient.
• Use the Right Charger: Use the original charger or one that meets the specifications required for the Soundcore R50i. A charger with a low current (5-10 watts) is recommended to avoid damaging the battery.
• Avoid Storing in the Case When Not in Use: After the battery is fully charged, removing the earbuds from the case is best to avoid unnecessary recharging, which can affect the battery’s life cycle.
• Clean Regularly: Make sure to clean the earbuds regularly using tissue or cotton buds. Cleanliness is essential to maintain sound quality and prevent damage from dust or dirt.
• Store in the Right Place: Keep the earbuds in a dry and cool place to prevent damage from moisture. Avoid storing them in damp areas or in direct sunlight.

Common Problems and Solutions Related to the Soundcore R50i Battery

Users of the Soundcore R50i often face several battery-related issues. Here are some common problems along with solutions you can try:

1. Battery Draining Quickly

Problem: The battery drains quickly, even with regular use.

Solution:

• Use the Right Charger: Ensure you charge a quality charger with the appropriate current. Using a charger that is too powerful can damage the battery.
• Charge Before First Use: After purchasing, charge the earbuds for at least 3 hours to enhance battery performance.
• Use Both Earbuds Together: Avoid using only one earbud, as this can cause an imbalance in power between the left and right earbuds.

2. Battery Not Charging

Problem: The earbuds do not charge when placed in the case.

Solution:

• Check Connections and Cleanliness: Ensure the connectors and earbuds are free from dust or dirt in the case. Use a soft cloth to clean them.
• Check Charger and Case: Make sure the charger is functioning correctly and the case is in good condition. If necessary, try using another charger to ensure the problem is not with the charger.

3. Uneven Battery Power

Problem: One earbud drains faster than the other.

Solution:

• Charge Separately: If one earbud drains faster, try charging both separately to ensure they are fully charged.
• Reset to Factory Settings: If the problem persists, consider resetting the earbuds to factory settings by pressing the multifunction button for 10 seconds.

4. Inaccurate Battery Indicator

Problem: The battery indicator shows incorrect information.

Solution:

• Check Bluetooth Connection: Disconnect and reconnect Bluetooth to refresh the connection status.
• Clean Earbuds Regularly: Dirt can affect the connection and indicator readings. Clean them regularly to maintain performance.

Following the solutions above, you can address common issues with the Soundcore R50i battery and ensure an optimal music-listening experience.

Also Read:

• Articles related to Soundcore Topic
• Articles related to TWS Topic

Conclusion

Maintaining and understanding the Soundcore R50i battery is crucial to ensure maximum performance from your earbuds. Following the maintenance tips and solutions for everyday problems, you can extend the battery’s lifespan and enhance your music-listening experience.

Don’t hesitate to share your experiences or ask questions in the comments below. If you find this article helpful, feel free to share it with your friends so they can also gain valuable information about the Soundcore R50i battery!